Email for availability

Features:

• Uniquely designed exclusively by JET
• The hardened and ground gears are featured in the headstock and gearbox.
• Dl-4 spindle is precision ground for accuracy and supported by high-quality tapered roller bearings.
• Headstock is constantly oiled during operation.
• Splined, not keyed, shafts are utilized in the headstock.
• Gearbox gives large threading and feed capabilities with no gear changes.
• V-way bed design is induction hardened and ground.
• Gap bed section provided for larger diameter work.
• Independent leadscrew and feed rod.
• Spindle actuation control is apron mounted.
• Inch-metric dials are standard.
• Compound and cross slide have backlash elimination.
• Adjustable gibs are incorporated in the carriage and slideways.
• Tailstock may be offset for turning tapers and includes an inch-metric graduated quill.
• Tolerance test certificate included.
• Standard Equipment
• Heavy-Duty Stand
• 6" 3-Jaw Direct Mount Chuck with Top
• Reversing Jaws
• 8" 4-Jaw Chuck
• 12" Face Plate
• Four-way Tool Post
• Steady and Follow Rest
• Micro-Carriage Bed Stop
• Front Removable Chip Tray
• Spindle Jog Button
• Foot Brake
• Coolant System with Splash Guard
• Metric Change Gears
• Halogen Work Lamp
• Centers and Headstock Center Sleeve
• Threading Dial
• Tool Box and tools

Specifications:

• Swing Over Bed (in.) 13
• Swing Over Cross Slide (in.) 7-1/2
• Swing Through Gap (in.) 19
• Distance Between Centers (in.) 40
• Spindle Bore (in.) 1-1/2
• Spindle Mount Dl-4
• Spindle Taper (With Sleeve) MT-5 (MT-3)
• Number of Spindle Speeds 12
• Range of Spindle Speeds (RPM) 40 - 1,800
• Number of Longitudinal and Cross Feeds 40
• Longitudinal Feeds Range(in./rev.) .0012- .0294
• Range of Crossfeeds (in./rev.) 0.0003 - 0.0103
• Number of Inch Threads 40
• Range of Inch Threads 4-112TPI
• Number of Metric Threads 22
• Range of Metric Threads (mm) 0.45 - 7.5
• Maximum Tool Size (in.) 5/8 x 5/8
• Maximum Compound Slide Travel (in.) 3-1/2
• Maximum Cross Slide Travel (in.) 6-3/8
• Maximum Carriage Travel (in.) 37-1/2
• Tailstock Spindle Travel (in.) 4-3/4
• Taper in Tailstock Spindle MT-3
• Steady Rest Capacity (in.) 3-3/4
• Follow Rest Capacity (in.) 2-3/4
• Width of Bed (in.) 10-1/2
• Motor 3HP,230V,lPh
• Dimensions 73-3/4"L x 29-1/2"W x 46-3/4"H
• Net Weight (lbs.) 2081

No posts found
 

Add new post